Cisco Cisco IOS Software Release 12.2(35)SE

© 2008 Cisco Systems, Inc. All rights reserved.

Cisco IOS Release 12.2(40)SE1 and 12.2(40)SE2 run on the Cisco Catalyst Blade Switch 3020 for HP, 
also referred to as the switch. 

If you wish to use Device Manager to upgrade the switch from Cisco IOS Release 12.2(35)SE through 
Cisco IOS Release 12.2(40)SE1 (the LAN Base image) to Cisco IOS Release 12.2(44)SE or later (the IP 
base image), you must first upgrade to Cisco IOS Release 12.2(40)SE2.

These release notes include important information about Cisco IOS Release 12.2(40)SE1 and later and 
any limitations, restrictions, and caveats that apply to them. Verify that these release notes are correct 
for your switch:

If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.

If your switch is on, use the show version privileged EXEC command. See the 

If you are upgrading to a new release, see the software upgrade filename for the software version. 
See the 

For the complete list of Cisco Catalyst Blade Switch 3020 for HP documentation, see the 

You can download the switch software from this site (registered Cisco.com users with a login password):

This software release is part of a special release of Cisco IOS software that is not released on the same 
8-week maintenance cycle that is used for other platforms. As maintenance releases and future software 
releases become available, they will be posted to Cisco.com in the Cisco IOS software area.