Cisco Cisco IOS Software Release 12.2(27)SBC
RADIUS-Based Lawful Intercept
show ssm
23
Cisco IOS Security Configuration Guide
show ssm
To display Segment Switching Manager (SSM) information for switched Layer 2 segments, use the show
ssm command in privileged EXEC mode.
ssm command in privileged EXEC mode.
show ssm {cdb | feature id [feature-id] | id | memory [chunk variable {feature | queue | segment}
| detail] | segment id [segment-id] | switch id [switch-id]}
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Use the show ssm command to determine the segment ID for an active switched Layer 2 segment. The
segment ID can be used with the debug condition xconnect command to filter debug messages by
segment.
segment ID can be used with the debug condition xconnect command to filter debug messages by
segment.
Examples
The following example shows sample output for the show ssm cdb command. The output for this
command varies depending on the type of hardware being used.
command varies depending on the type of hardware being used.
Router# show ssm cdb
Switching paths active for class SSS:
-------------------------------------
cdb
Displays information about the SSM capabilities database.
feature id
Displays information about SSM feature settings.
feature-id
(Optional) Displays information for a specific feature ID.
id
Displays information for all SSM IDs.
memory
Displays memory usage information.
chunk variable
(Optional) Displays memory usage information for memory consumed by
variable chunks.
variable chunks.
feature
Displays information about memory consumed by the feature.
queue
Displays information about memory consumed by the queue.
segment
Displays information about memory consumed by the segment.
detail
(Optional) Displays detailed memory usage information.
segment id
Displays information about SSM segment settings.
segment-id
(Optional) Displays information for a specific SSM segment.
switch id
Displays information about SSM switch settings.
switch-id
(Optional) Displays information for a specific SSM switch ID.
Release
Modification
12.2(22)S
This command was introduced.
12.2(28)SB
This command was integrated into Cisco IOS Release 12.2(28)SB.