Cisco Cisco IOS Software Release 12.2(27)SBC

ページ / 32
RADIUS-Based Lawful Intercept
  show subscriber session
28
Cisco IOS Security Configuration Guide
show subscriber session
To display information about subscriber sessions on an Intelligent Service Gateway (ISG), use the show 
subscriber session
 command in privileged EXEC mode. 
show subscriber session [identifier {authen-status {authenticated | unauthenticated} | 
authenticated-domain domain-name | authenticated-username username dnis dnis | media 
type | nas-port identifier protocol type source-ip-address ip-address subnet-mask | timer 
timer-name | tunnel-name name | unauthenticated-domain domain-name 
unauthenticated-username username} | uid session-identifier | username username
[detailed
Syntax Description
identifier 
(Optional) Displays information about subscriber sessions that match 
the specified identifier.
authen-status
(Optional) Displays information about sessions with a specified 
authentication status.
authenticated 
(Optional) Displays information for sessions that have been 
authenticated.
unauthenticated 
(Optional) Displays information for sessions that have not been 
authenticated.
authenticated-domain 
domain-name 
(Optional) Displays information for sessions with a specific 
authenticated domain name. 
authenticated-username 
username 
(Optional) Displays information for sessions with a specific 
authenticated username. 
dnis dnis 
(Optional) Displays information for sessions with a specific Dialed 
Number Identification Service (DNIS) number.
media type 
(Optional) Displays information for sessions that use a specific type of 
access media.
nas-port identifier
(Optional) Displays information for sessions with a specific network 
access server (NAS) port identifier. The identifier argument can be one 
or more of the following values:
adapter adapter-number
channel channel-number 
ipaddr ip-address 
port port-number 
shelf shelf-number 
slot slot-number 
sub-interface sub-interface-number 
type interface-type 
vci vci-number 
vlan vlan-id 
vpi vpi-number 
protocol type
(Optional) Displays information for sessions that use a specific type of 
access protocol.