Cisco Cisco IOS Software Release 12.2(27)SBC
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006, 2007 Cisco Systems, Inc. All rights reserved.
BGP Support for Fast Peering Session
Deactivation
Deactivation
The BGP Support for Fast Peering Session Deactivation feature introduces an event-driven notification
system that allows a Border Gateway Protocol (BGP) process to monitor BGP peering sessions on a
per-neighbor basis. This feature improves the response time of BGP to adjacency changes by allowing
BGP to detect an adjacency change and deactivate the terminated session in between standard BGP
scanning intervals. Enabling this feature improves overall BGP convergence.
system that allows a Border Gateway Protocol (BGP) process to monitor BGP peering sessions on a
per-neighbor basis. This feature improves the response time of BGP to adjacency changes by allowing
BGP to detect an adjacency change and deactivate the terminated session in between standard BGP
scanning intervals. Enabling this feature improves overall BGP convergence.
Configuration Information
Configuration information is included in the “Configuring BGP Neighbor Session Options” module of
the Cisco IOS BGP Configuration Guide, Release 12.4T,
the Cisco IOS BGP Configuration Guide, Release 12.4T,
at the following URL:
http://www.cisco.com/en/US/docs/ios/12_4t/ip_route/configuration/guide/brbpeer.html
The following sections provide information about this feature:
•
BGP Support for Fast Peering Session Deactivation
•
Configuring Fast Session Deactivation
•
Configuring Fast Session Deactivation for a BGP Neighbor: Example
For a complete list of features included in the “Configuring BGP Neighbor Session Options” module,
see the Feature Information table located toward the end of the module.
see the Feature Information table located toward the end of the module.
Command Reference Information
The following command is new or modified for this feature:
•
neighbor fall-over
Detailed information about this command is included in the Cisco IOS IP Routing: BGP Command
Reference,
Reference,
at the following URL: