Cisco Cisco IOS Software Release 12.2(27)SBC
Corporate Headquarters:
© 2004–2006 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
ATM Conditional Debug Support
First Published: May 7, 2004
Last Updated: February 28, 2006
Last Updated: February 28, 2006
Most ATM debugging commands are implemented either at the system level or at the interface level. The
ATM Conditional Debug Support feature allows debugging to be limited specifically to an ATM
interface, to a virtual channel identifier (VCI), or to a virtual path identifier/virtual channel identifier
(VPI/VCI) pair, through use of the debug condition interface command.
ATM Conditional Debug Support feature allows debugging to be limited specifically to an ATM
interface, to a virtual channel identifier (VCI), or to a virtual path identifier/virtual channel identifier
(VPI/VCI) pair, through use of the debug condition interface command.
History for the ATM Conditional Debug Support Feature
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
support. Access Cisco Feature Navigator at
. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
the login dialog box and follow the instructions that appear.
Contents
•
•
•
•
•
•
Release
Modification
12.0(28)S
This feature was introduced.
12.2(25)S
This feature was integrated into Cisco IOS Release 12.2(25)S.
12.2(27)SBC
This feature was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(28)SB
Support for the Cisco 10000 series routers was added.