HP 603259-B21 ユーザーズマニュアル
NOTE:
NOTE:
NOTE:
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Memory Population Guidelines
Memory Population Guidelines
Memory Population Guidelines
Memory Population Guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
Some DIMM installation guidelines are summarized below:
For the HP ProLiant BL460c G7 server with twelve (12) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots.
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
There are two (2) DIMM slots for each memory channel; twelve (12) total slots.
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix unbuffered memory (UDIMMs) with registered memory (RDIMMs).
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a two processor system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots
will be 1,4; 2,5 on the BL460c G7
Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of
supporting 1.5V operations
Do not mix unbuffered memory (UDIMMs) with registered memory (RDIMMs).
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a two processor system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots
will be 1,4; 2,5 on the BL460c G7
Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of
supporting 1.5V operations
DIMM slot/capacity/populated speed table
DIMM slot/capacity/populated speed table
DIMM slot/capacity/populated speed table
DIMM slot/capacity/populated speed table
DIMM Type
Registered DIMMS (RDIMMs)
Registered DIMMS (RDIMMs)
Registered DIMMS (RDIMMs)
Registered DIMMS (RDIMMs)
Unbuffered with ECC
Unbuffered with ECC
Unbuffered with ECC
Unbuffered with ECC
DIMMs (UDIMMs)
DIMMs (UDIMMs)
DIMMs (UDIMMs)
DIMMs (UDIMMs)
DIMM Rank
Single
Single
Single
Single
Rank
Rank
Rank
Rank
(1R)
(1R)
(1R)
(1R)
Dual Rank (2R)
Dual Rank (2R)
Dual Rank (2R)
Dual Rank (2R)
Quad Rank (4R)
Quad Rank (4R)
Quad Rank (4R)
Quad Rank (4R)
Single
Single
Single
Single
Rank
Rank
Rank
Rank
(1R)
(1R)
(1R)
(1R)
Dual Rank (2R)
Dual Rank (2R)
Dual Rank (2R)
Dual Rank (2R)
DIMM Capacity
4GB
2GB
4GB
8GB
16GB
16GB
32 GB
1GB
2GB
4GB
DIMM Native Speed (MHz)
1333
1333
1333
1333
1333
1066
1066
1333
1333
1333
DIMM Voltage
LV/Std
Std
Std
LV/Std
LV/Std
Std
LV/Std
Std
Std
Std
SLOTS THAT CAN BE POPULATED
SLOTS THAT CAN BE POPULATED
SLOTS THAT CAN BE POPULATED
SLOTS THAT CAN BE POPULATED
12 slot servers
12 slot servers
12
12
12
12
12
12
12
12
12
12
MAXIMUM CAPACITY (GB)
MAXIMUM CAPACITY (GB)
MAXIMUM CAPACITY (GB)
MAXIMUM CAPACITY (GB)
48
24
48
96
192
192
384
12
24
48
POPULATED DIMM SPEED (MHz)
POPULATED DIMM SPEED (MHz)
POPULATED DIMM SPEED (MHz)
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1 DIMM Per Channel
1333
1333
1333
1333
1333
1066
1066
1333
1333
1333
2 DIMM Per Channel
1066/
1333
1333
1333
1066/
1333
1333
*
1066/
1333
1333
*
800
800
1333
1333
1333
NOTE:
NOTE:
NOTE:
NOTE: *By default, low voltage (LV) DIMMs will operate at standard voltage (1.5V) and operate at 1333MHz in a 2 DIMM per
channel configuration. For power savings, this behavior can be changed in RBSU to operate at low voltage (1.35V) and 1066MHz.
channel configuration. For power savings, this behavior can be changed in RBSU to operate at low voltage (1.35V) and 1066MHz.
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
HP ProLiant BL460c Generation 7 (G7) Server Blade
HP ProLiant BL460c Generation 7 (G7) Server Blade
HP ProLiant BL460c Generation 7 (G7) Server Blade
Memory
DA - 13706 North America — Version 21 — November 18, 2011
Page 31