Cisco Cisco IOS Software Release 15.0(1)SE

© 2015 Cisco Systems, Inc. All rights reserved.

Cisco IOS Release 15.0(2)SE and later runs on Catalyst 3750, 3560, 3560-C, 2960, 2960-S, 2960-C, and 
2960-Plus switches and on Cisco EtherSwitch service modules. 

Not all Catalyst 3750 and 3560 switches can run this release. These models are not supported in Cisco 
IOS Release 12.2(58)SE1 and later: WS-C3560-24TS, WS-C3560-24PS. WS-C3560-48PS, 
WS-C3560-48TS, WS-C3750-24PS, WS-C3750-24TS, WS-C3750-48PS, WS-C3750-48TS, 
WS-3750G-24T, WS-C3750G-12S, WS-C3750G-24TS, WS-C3750G-16TD. For ongoing maintenance 
rebuilds for these models, use Cisco IOS Release 12.2(55)SE and later (SE1, SE2, and so on).

The Catalyst 3750 switches and the Cisco EtherSwitch service modules support stacking through 
Cisco StackWise technology. The Catalyst 3560 and 2960 switches do not support switch stacking. 
Catalyst 2960-S does support stacking. Unless otherwise noted, the term switch refers to a standalone 
switch and to a switch stack.

The Catalyst 3560-C switch does not support the IP services image.

These release notes include important information about Cisco IOS Release 15.0(2)SE and any 
limitations, restrictions, and caveats that apply to the releases. Verify that these release notes are correct 
for your switch:

If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.

If your switch is on, use the show version privileged EXEC command. See the 

If you are upgrading to a new release, see the software upgrade filename for the software version. 
See the 

You can download the switch software from this site (registered Cisco.com users with a login password):