Cisco Cisco ASA 5580 Adaptive Security Appliance プリント

ページ / 1214
 
1-107
思科 ASA 系列命令参考,命令
 
 1       same-security-traffic  shape 命令
  setup
示例
以下示例展示如何完成
 setup
 命令:
ciscoasa(config)# setup
Pre-configure Firewall now through interactive prompts [yes]? yes 
Firewall Mode [Routed]: routed
Enable password [<use current password>]: writer
Allow password recovery [yes]? yes
Clock (UTC):
   Year: 2005
   Month: Nov
   Day: 15
   Time: 10:0:0
Inside IP address: 192.168.1.1
Inside network mask: 255.255.255.0
Host name: tech_pubs
Domain name: example.com
IP address of host running Device Manager: 10.1.1.1
The following configuration will be used:
Enable password: writer
Allow password recovery: yes
Clock (UTC): 20:54:44 Sep 17 2005
Firewall Mode: Routed
Inside IP address: 192.168.1.1
Inside network mask: 255.255.255.0
Host name: tech_pubs
Domain name: example.com
IP address of host running Device Manager: 10.1.1.1
Use this configuration and write to flash? yes
Enable password:
输入启用密码。(密码必须至少有三个字符。)
Allow password 
recovery [yes]?
输入
 yes 或 no
Clock (UTC):
在此字段不可输入任何内容。默认使用
 UTC 时间。
Year:
使用四位数输入年份,例如
 2005。年范围为 1993 至 2035。
Month:
输入月份名称的前三个字符,例如,
Sep
 表示 9 月。
Day:
输入月日期,从
 1 到 31。
Time:
输入
 24 小时制的时、分、秒,例如,输入 20:54:44 表示晚上 8 时 54 
 44 秒。
Host name:
输入要在命令行提示符中显示的主机名。
Domain name:
输入
 ASA 所在网络的域名。
IP address of host 
running Device 
Manager:
输入需要访问
 ASDM 的主机的 IP 地址。
Use this configuration 
and save to flash 
(yes)?
输入
 yes 或 no。如果输入 yes,将会启用内部接口,并且将请求的配置
写入闪存分区。
如果输入
 no,设置提示将重复出现,从第一个问题开始:
Pre-configure Firewall now through interactive prompts [yes]?
输入
 Ctrl + Z 退出设置,输入 yes 则重复提示。
 1-1
设置提示(续)