Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point デザインガイド
76
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.0
OL-21848-01
Connecting the Cisco 1520 Series Mesh Access Point to Your Network
Configuring Global Mesh Parameters
This section provides instructions to configure the mesh access point to establish a connection with the
controller including:
controller including:
•
Setting the maximum range between RAP and MAP (not applicable to AP1130 and AP1240).
•
Enabling a backhaul to carry client traffic.
•
Defining if VLAN tags are forwarded or not.
•
Defining the authentication mode (EAP or PSK) and method (local or external) for mesh access
points including security settings (local and external authentication).
points including security settings (local and external authentication).
You can configure the necessary mesh parameters using either the GUI or the CLI. All parameters are
applied globally.
applied globally.
Configuring Global Mesh Parameters - Using the GUI
To configure global mesh parameters using the controller GUI, follow these steps:
Step 1
Choose Wireless > Mesh (see
Figure 46
Mesh Page
Step 2
Modify the mesh parameters as appropriate.
describes each parameter.