Cisco Cisco Industrial Wireless 3702 Access Point インストールガイド

Cisco IW3702 Access Point Getting Started Guide

Configuration

For more information, see the “Obtaining and Assigning an IP Address” section of the “Configuring the Access Point for 
the First Time” chapter of the 

Connecting to the Access Point Console Port

You can connect to the console port and open the CLI from a terminal session to begin configuring the device. 

To connect to the access point:

Use a 0.5 in. (13 mm) socket wrench to remove the console (CON) port cover by turning it counterclockwise.

Connect the RJ-45-to-DB-9 adapter cable to the 9-pin serial port on the PC. 

Connect the other end of the cable to the access point console port.

1

Console port cover