Cisco Cisco 3365 Mobility Services Engine
30
Release Notes for Cisco Mobility Services Engine, Release 8.0.110.0
OL-32458-01
Operational Notes for Mobility Services Engine
Note
For the initial login, even if you choose Skip (S), you will be prompted to enter the password. This is
because it is mandatory to change the root password at the initial login.
because it is mandatory to change the root password at the initial login.
Configuring the Prime Infrastructure Communication Username and Password Using MSE setup.sh
You can configure the Prime Infrastructure Communication username and password using the MSE
setup.sh script file.
setup.sh script file.
Scenarios which you might encounter while configuring the Prime Infrastructure username and
password are as follows:
password are as follows:
•
If you configure a new Prime Infrastructure username and password, the password provided is
applicable for the new Prime Infrastructure username created.
applicable for the new Prime Infrastructure username created.
•
If you only configure the Prime Infrastructure username without configuring the Prime
Infrastructure password, then the default password admin is applied to the configured username.
Infrastructure password, then the default password admin is applied to the configured username.
•
If you only configure the Prime Infrastructure password without configuring the Prime
Infrastructure username, then the password for the admin user is changed.
Infrastructure username, then the password for the admin user is changed.
•
If you configure an existing username for the Prime Infrastructure username and also configure the
password, then the password for that existing user is changed.
password, then the password for that existing user is changed.
Note
These users are API users, and they do not have corresponding OS users on the MSE appliance.
Configuration Changes for Greater Location Accuracy
In some RF environments, where location accuracy is around 60 to 70% or where incorrect client or tag
floor location map placements occur, you might need to modify the moment RSSI thresholds in the
Context Aware Service > Advanced > Location Parameters page on the Prime Infrastructure.
floor location map placements occur, you might need to modify the moment RSSI thresholds in the
Context Aware Service > Advanced > Location Parameters page on the Prime Infrastructure.
The following RSSI parameters might require modification:
•
locp-individual-rssi-change-threshold
•
locp-aggregated-rssi-change-threshold
•
locp-many-new-rssi-threshold-in-percent
•
locp-many-missing-rssi-threshold-in-percent
Caution
Contact Cisco TAC for assistance in modifying these parameters.
Wireless Security Module with 3600 AP
If you are attempting to deploy Wireless Security Module (WSM) with 3600 APs, then APs should be
placed in monitor mode with submode wIPS and advanced wIPS engine enabled on the Prime
Infrastructure.
placed in monitor mode with submode wIPS and advanced wIPS engine enabled on the Prime
Infrastructure.