Cisco Cisco 5760 Wireless LAN Controller テクニカルリファレンス
Examples
This example shows how to define and apply a VLAN access map vmap4 to VLANs 5 and 6 that will cause
the interface to drop an IP packet if the packet matches the conditions defined in access list al2.
the interface to drop an IP packet if the packet matches the conditions defined in access list al2.
Controller(config)#
vlan access-map vmap4
Controller(config-access-map)#
match ip address al2
Controller(config-access-map)#
action drop
Controller(config-access-map)#
exit
Controller(config)#
vlan filter vmap4 vlan-list 5-6
You can verify your settings by entering the show vlan access-map privileged EXEC command.
Related Commands
Description
Command
Configures a standard numbered ACL.
access-list
Specifies the action to be taken if the packet matches
an entry in an ACL.
an entry in an ACL.
action
Creates a named access list.
ip access list
Creates a named MAC address access list.
mac access-list extended
Displays the VLAN access maps created on the
switch.
switch.
show vlan access-map
Creates a VLAN access map.
vlan access-map
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
144
OL-29471-01
match (access-map configuration)