Cisco Cisco 5520 Wireless Controller 技術マニュアル
External Web Authentication Using a RADIUS Server - Cisco Systems
http://kbase/paws/servlet/ViewFile/112134/external-web-radius-00.xml?convertPaths=1[9/28/2010 9:54:00 AM]
is configured for basic operation and that the LAPs are registered to the WLC. If you are a new user trying to set up the WLC for basic operation with
LAPs, refer to
LAPs, refer to
. To view the LAPs that are registered to the WLC, navigate to
Wireless > All APs.
Once the WLC is configured for basic operation and has one or more LAPs registered to it, you can configure the WLC for external web
authentication using an external web server. In our example, we are using a Cisco Secure ACS version 4.1.1.24 as the RADIUS server. First, we will
configure the WLC for this RADIUS server, and then we will look the configuration required on the Cisco Secure ACS for this setup.
authentication using an external web server. In our example, we are using a Cisco Secure ACS version 4.1.1.24 as the RADIUS server. First, we will
configure the WLC for this RADIUS server, and then we will look the configuration required on the Cisco Secure ACS for this setup.
Configure the WLC for Cisco Secure ACS
Perform these steps in order to add the RADIUS server on the WLC:
1. From the WLC GUI, click the
SECURITY menu.
2. Under
AAA menu, navigate to the Radius > Authentication submenu.
3. Click
New, and enter the IP address of the RADIUS server. In this example, the IP address of the server is 10.77.244.196.
4. Enter the Shared Secret in the WLC. The Shared Secret should be configured the same on the WLC.
5. Choose either
ASCII or Hex for Shared Secret Format. The same format needs to be chosen on the WLC.
6.
1812 is the Port Number used for RADIUS authentication.
7. Ensure that the Server Status option is set to
Enabled.
8. Check the Network User
Enable box to authenticate the network users.
9. Click
Apply.
Configure the WLAN on WLC for Web Authentication
The next step is to configure the WLAN for web authentication on WLC. Perform these steps in order to configure the WLAN on WLC:
1. Click the
WLANs menu from the controller GUI, and choose New.
2. Choose
WLAN for Type.
3. Enter a Profile Name and a WLAN SSID of your choice, and click
Apply.
Note: The WLAN SSID is case sensitive.