Cisco Cisco Email Security Appliance C650 テクニカルリファレンス
395
Cisco AsyncOS 8.5.5 CLI Reference Guide
Chapter 3 The Commands: Reference Examples
Reporting
Example: Enabling Reporting Filters (M-Series only)
Table 3-159
reportingconfig
- Enabling reporting filters
mail3.example.com> reportingconfig
Choose the operation you want to perform:
- FILTERS - Configure filtering for the SMA.
- ALERT_TIMEOUT - Configure when you will be alerted due to failing to
get reporting data
- DOMAIN - Configure domain report settings.
- MODE - Enable/disable centralized reporting.
[]> filters
Filters remove specific sets of centralized reporting data from the
"last year" reports. Data from the reporting groups selected below
will not be recorded.
All filtering has been disabled.
1. No Filtering enabled
2. IP Connection Level Detail.
3. User Detail.
4. Mail Traffic Detail.
Choose which groups to filter, you can specify multiple filters by
entering a comma separated list:
[]> 2, 3
Choose the operation you want to perform:
- FILTERS - Configure filtering for the SMA.
- ALERT_TIMEOUT - Configure when you will be alerted due to failing to
get