Cisco Cisco Aironet 340 Ethernet Bridges ユーザーガイド
A-3
Console Port Pin-Out
The Console Port is a DCE using a DB-9 female connector. The follow-
ing table describes the pinouts on the connector and how you should
connect the DB-9 pins to the DB-25 on a terminal. Signal names are in
terms of the DTE.
ing table describes the pinouts on the connector and how you should
connect the DB-9 pins to the DB-25 on a terminal. Signal names are in
terms of the DTE.
Most terminals and communication programs will only require Txd, Rxd
and Gnd to communicate with the Aironet 340 Series Bridge. Some may
also require DCD before the connection on-line can be made. If you use
hardware flow control, connect all lines.
and Gnd to communicate with the Aironet 340 Series Bridge. Some may
also require DCD before the connection on-line can be made. If you use
hardware flow control, connect all lines.
Signal
DB-9 Male
Aironet Console Port
DB-25 Female
Computer Serial Port
RxD
2
3
TxD
3
2
GND
5
7
DCD
1
8
DTR
4
20
CTS
8
5
RTS
7
4
Signal
DB-9 Male
Aironet Console Port
DB-9 Female
Computer Serial Port
RxD
2
2
TxD
3
3
GND
5
5
DCD
1
1
DTR
4
4
CTS
8
8
RTS
7
7