Cisco Cisco TelePresence MX700 リリースノート
Resolved caveats
Cisco TelePresence System C/EX/SX/MX Series Software Release Notes
Page 66 of 194
Resolved caveats
Using the Bug Search Tool
You can use the Bug Search Tool to find information about caveats (bugs) for this release, including a
description of the problems and available workarounds. The Bug Search Tool lists both open and
resolved caveats.
description of the problems and available workarounds. The Bug Search Tool lists both open and
resolved caveats.
To use the Bug Search Tool, follow these steps:
Step 1 Access the Bug Search Tool by navigating to
http://www.cisco.com/cisco/psn/bssprt/bss
Step 2 Log in with your Cisco.com user ID and password.
Step 3 To look for information about a specific problem, enter the bug ID number in the
Search for bug ID field, then click Go.
Resolved caveats since TC 5.1.5
Application
Reference ID
Summary
CSCud16471
When sending this string to EX90 on TC5.1.4, and the unit is currently in a
ringing state, the Message appear ON TOP of the Accept or Decline message.
ringing state, the Message appear ON TOP of the Accept or Decline message.
CSCua92105
A Cisco TC based TelePresence codec may get into a state where phone queries
fail.
fail.
CSCud17921
While running TC5.1.4, the system alerts for a split second and then the message
is received from TMS indicating "Scheduled Call is Being Connected" and it stops
the system from actively ringing while in a ringing state.
is received from TMS indicating "Scheduled Call is Being Connected" and it stops
the system from actively ringing while in a ringing state.
Camera
Reference ID
Summary
CSCud58556
Pan motor slippage when invoking a new preset before the location of the previous
preset has been reached.
preset has been reached.
System
Reference ID
Summary
CSCub82639
The fan on one of SX20 Codec sometimes kicks up speed and makes loud noise.
CSCuc64359
When a corrupt config.db is loaded onto a TC5 or TC6 system, the codec will not
fully boot and system will not load to a fully operational state.
fully boot and system will not load to a fully operational state.
CSCub85220
EX90 reboots randomly due to an overflow of vsource interrupts when a PC is
connected via HDMI/DVI. This causes VPE1 to stop responding and system will
boot on heartbeat failure.
connected via HDMI/DVI. This causes VPE1 to stop responding and system will
boot on heartbeat failure.