Cisco Cisco Aironet 1810 OfficeExtend Access Point インストールガイド

ページ / 40
3
 
1  
About this Guide
This guide provides instructions on how to install and configure your Cisco Aironet OEAP1810 series 
access points. This guide also provides mounting instructions and limited troubleshooting procedures.
The Aironet OEAP1810 series access point is abbreviated as AP in this document.
2  
About the Access Point
The Cisco Aironet OEAP1810 series OfficeExtend access point is an 802.11 a/b/g/n/ac (Wave 2) access 
point, with internal antennas. You can vertically mount the access point on a desk mount using desk 
cradle kit. The AP supports 2.4 GHz 2x2 802.11b/g/n MU-MIMO and 5 GHz 2x2 802.11 a/n/ac 
(Wave 2) MU-MIMO applications simultaneously.
The OEAP1810 access point offers a highly secure enterprise wireless and wired connection to the 
home, micro-branch or other types of remote sites. This access point extends the corporate network 
to teleworkers, to mobile workers, or to micro-sites. 
The access point connects to the home or site broadband Internet access and establishes a highly secure 
tunnel to the corporate network. This tunnel allows remote employees access to data, voice, video, and 
cloud services for a mobility experience consistent with that at the corporate office. The Cisco Aironet 
OEAP 1810 Series Access Points support secure corporate data access and personal connectivity for 
teleworker's home devices with segmented home traffic.
Access Point Features
The features of the OEAP1810 series access points are:
Supported mode(s) of operation:
Centralized
Radio features are:
Dual-radio, dual-band, 802.11ac Wave 2
2.4 GHz and 5 GHz concurrent radios
2 GHz and 5 GHz radios with 2TX x 2RX and 2 spatial streams SU-MIMO and MU-MIMO.
802.11ac based Transmit Beamforming
Quality of Service (QoS)
Radio Resource Management (RRM)