Cisco Cisco Aironet 1810w Access Point インストールガイド
7
4
Unpacking the AP
To unpack the access point, follow these steps:
Step 1
Unpack and remove the access point and the mounting accessories, from the shipping box.
Step 2
Return any packing material to the shipping container and save it for future use.
Step 3
Verify that you have received the items listed below. If any item is missing or damaged, contact
your Cisco representative or reseller for instructions.
your Cisco representative or reseller for instructions.
–
The access point
–
Mounting bracket AIR-AP-BRACKET-W2=
–
Torx security screw and mylar label to cover the screw
The following accessories can be ordered separately from Cisco:
•
Spacer kit AIR-AP1810W-KIT=, includes spacer and RJ-45 jumper cable.
•
Cradle kit AIR-OEAP1810-CRD=, includes back cover and RJ-45 jumper cable.
•
Cisco local power supply AIR-PWR-D=.
•
Physical security kit AIR-SEC-50=, which includes 50 security screws used to secure the access
point onto the wall-mounting bracket, 50 RJ-45 block-out plugs and 2 unlock keys for blocking
physical access to the RJ45 Ethernet ports.
point onto the wall-mounting bracket, 50 RJ-45 block-out plugs and 2 unlock keys for blocking
physical access to the RJ45 Ethernet ports.