Cisco Cisco Aironet 3500i Access Point データシート
Installing the Antenna
10
Cisco Aironet Six-Element Dual-Band MIMO Patch Array Antenna (AIR-ANT25137NP-R)
OL-23461-01
To mount the antenna on a pole or mast, you will need these supplies:
•
Two U-bolts
Note
Cisco recommends using a guillotine-style U-bolt or a U-bolt with a
notched, toothed backing plate to ensure proper support and permanent
positioning.
notched, toothed backing plate to ensure proper support and permanent
positioning.
Note
The pole or mast must be rigid enough to hold the weight of the antenna
plus the associated forces produced by wind loads. In addition, the pole
or mast must be structurally strong enough to withstand the clamping
force of the U-bolts.
plus the associated forces produced by wind loads. In addition, the pole
or mast must be structurally strong enough to withstand the clamping
force of the U-bolts.
You may need the following tools and equipment, which are not provided:
•
A drill and drill bit
•
A pencil
Mounting on a Wall or Ceiling
Follow these steps to mount your antenna on a wall or ceiling.
Step 1
Remove the antenna and bracket from the shipping container. The antenna and
bracket are attached and the bracket is locked in place to facilitate shipping.
bracket are attached and the bracket is locked in place to facilitate shipping.
Step 2
Use a 10-mm wrench to loosen and remove the adjustment bolt from the shipping
position (
position (
).