Cisco Cisco FastHub 412M 10 100 Repeater
Corporate Headquarters:
Copyright © 2002-2005 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the FastHub 400 10/100 Series,
Firmware Version 1.00.08
Firmware Version 1.00.08
April 2005
These release notes include important information about the FastHub 400 10/100 series (hereafter
referred to as the FastHub 400) and any limitations, restrictions, and caveats that apply to it.
referred to as the FastHub 400) and any limitations, restrictions, and caveats that apply to it.
For the complete list of FastHub 400 10/100 series documentation, see the
.
The tracking numbers for some items in this document are added for your convenience.
Contents
•
•
•
•
•
•
•
Documentation Notes
The installation and configuration guide incorrectly lists the
CISCO-SIBU-SIMPLE-UPGRADE-MIB.my MIB as a supported MIB. The hub does not support this
MIB.
CISCO-SIBU-SIMPLE-UPGRADE-MIB.my MIB as a supported MIB. The hub does not support this
MIB.
In Firmware Version 1.00.03, the enable password must have between four to seven alphanumeric
characters. The string can include all alphanumeric characters except a space or a question mark and is
case sensitive.
characters. The string can include all alphanumeric characters except a space or a question mark and is
case sensitive.