Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル

Starting the Web-Based Switch Configuration Utility

Cisco Small Business SF200E Series Advanced Smart Switch

10

 

To open the web-based switch configuration utility:

Open a web browser.

Enter the IP address of the switch that you are configuring in the address bar on 
the browser, and then press Enter. (The factory default IP address is 
192.168.1.254.) The Log In page opens.

To log in to the web-based switch configuration utility:

Enter the username and password. The factory default user name is cisco and the 
default password is cisco.

When the switch boots with the factory default configuration, the web-

based switch configuration utility appears in the default language. After you log in, 
you can download additional languages by using the Upgrade/Backup Firmware/Language page.

If this is the first time that you logged on with the default user name (cisco) and the 
default password (cisco) or your password has expired, the Change Admin 
Password page opens. Enter the new password, confirm it, click Apply, and then 
click Close. (The characters ', ", %, and ? are not supported.) The new password is 
saved. 

Password complexity is enabled by default and the new password must comply to 
the default password complexity rule defined by the password strength. (See 

 for more information.) The password strength check can be 

temporarily disabled by selecting the Disable Password Strength Enforcement 
option.

Click Login.

When the login attempt is successful, the Getting Started page opens.

If you entered an incorrect user name or password, an error message is displayed 
and the Log In page remains displayed on the screen.

When logging in by using HTTP or HTML, if you are provided an option to choose 
from more than one network port, select the lowest number port.