Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル

Voice and Media

Cisco Small Business SF200E Series Advanced Smart Switch

124

 

When a port is LLDP-MED enabled with network policy, the switch will advertise 
its Media VLANs in the LLDP-MED network policy TLVs out to the port. When a 
LLDP Media Endpoint is discovered, the switch will install the Media VLAN at the 
corresponding port. You can enable LLDP-MED and networking policy in the 
Administration > Discovery - LLDP pages.

Media VLAN is enabled and disabled globally. Each application and its Media 
VLAN is configured on a per-port basis. For example, Guest Voice can be on 
Media VLAN 1 on interface g1, but can be on Media VLAN 10 on interface g2. 

The Media VLAN Interface Settings Table displays each media traffic type that 
can be enabled, and shows its status and settings on the selected port.

To configure Media VLAN applications:

Click VLAN management > Voice and Media > Media VLAN in the navigation 
window.

Select Enable for Admin Mode to globally enable this feature on the switch, and 
then click Apply.

Select an interface to configure from the Interface list.

Ports that are members of a LAG cannot be enabled for Media VLAN applications 
(see 

).

From the Application list, select the media traffic type to configure:

•

Voice

•

Voice Signaling

•

Guest Voice

•

Guest Voice Signaling

•

Softphone Voice

•

Video Conferencing

•

Streaming Video

•

Video Signaling

Click Edit.