Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル
Security
RADIUS
Cisco Small Business SF200E Series Advanced Smart Switch
159
10
You can use the RADIUS page to configure global RADIUS settings and add
RADIUS servers.
RADIUS servers.
Configuring Global RADIUS Settings
To configure the global settings:
STEP 1
Click Security > RADIUS in the navigation window.
STEP 2
Enter the parameters:
•
Retries—Maximum number of times the RADIUS client retransmits requests
to the RADIUS server. The range is 1 to 10. The default is 3.
to the RADIUS server. The range is 1 to 10. The default is 3.
•
Timeout for Reply—Number of seconds the switch waits for a RADIUS
server to reply to a server request before sending another request. The
range is 1 to 30. The default is 3.
server to reply to a server request before sending another request. The
range is 1 to 30. The default is 3.
•
Dead Time—Length of time a RADIUS server is bypassed once the switch
determines it is unavailable. Bypassing unavailable switches improves
switch response times. The range is 0 to 2000. The default is 0.
determines it is unavailable. Bypassing unavailable switches improves
switch response times. The range is 0 to 2000. The default is 0.
•
RADIUS Attribute 4 (NAS-IP Address)—Select to enable the switch to
include the network access server (NAS) attribute in Access Request
RADIUS server packets. If this option is disabled, the RADIUS client uses the
switch management port address as the NAS-IP Address.
include the network access server (NAS) attribute in Access Request
RADIUS server packets. If this option is disabled, the RADIUS client uses the
switch management port address as the NAS-IP Address.
•
NAS-IP Address—IP address to include in Access Request packets. This
field is editable only when RADIUS Attribute 4 is enabled. The address
should be unique to the NAS within the scope of the RADIUS server.
field is editable only when RADIUS Attribute 4 is enabled. The address
should be unique to the NAS within the scope of the RADIUS server.
NOTE:
The Current RADIUS Server field displays the IP address of the most
recently configured RADIUS server, if any.
STEP 3
Click Apply. Your changes are saved to the Running Configuration.