Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル

802.1X

Cisco Small Business SF200E Series Advanced Smart Switch

176

 

The Current Port Control field shows the current authorization mode for the port.

Configure the following:

•

Administrative Port Control—Select the port authorization mode. The 
possible values are:

-

Force Unauthorized—Denies the selected interface system access by 
moving the interface into unauthorized state.

-

Auto—The switch detects the mode of the interface based on the 
outcome of authentication exchanges between the supplicant, the 
authenticator, and the authentication server.

-

Force Authorized—The port is placed into an authorized state without 
requiring authentication with the authentication server. The interface 
sends and receives normal traffic without client port-based 
authentication.

•

User Name—Select the user to be used by the port to identify itself as a 
supplicant. The user must be one of the switch management users 
configured in the switch. The password configured for the user will be used 
in the authentication process. As a supplicant, the switch supports EAP-MD5 
authentication method. (See 

 to set up the users.) 

Click Apply and then click Close. Your changes are saved to the Running 
Configuration.

To display ports that have authenticated users on the Authenticated Hosts page, 
click Security > 802.1X > Authenticated Hosts in the navigation window.

The Authenticated Hosts Table displays the following information for each host:

•

Port—Port used for authentication.

•

User Name—User name of the host.

•

Supplicant MAC Address—Supplicant device MAC address.

•

Session Time—Time since the supplicant logged in.

•

Session Timeout—Time that the given session is valid. The time period in 
seconds is returned by the RADIUS server on authentication of the port.