Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル
Viewing Statistics
Interface Statistics
Cisco Small Business SF200E Series Advanced Smart Switch
23
2
Configuring System Settings
To configure the system settings:
STEP 1
Click Status and Statistics > System Summary. The System Summary page
opens.
opens.
STEP 2
Click Edit to modify the following settings:
•
System Location—Enter the location where the switch is physically located.
•
System Contact—Enter the name of a contact person.
•
Hostname—Enter the hostname. Use only letters, digits, and hyphens. Host
names cannot begin or end with a hyphen. No other symbols, punctuation
characters, or blank spaces are permitted (as specified in RFC1033,
RFC1034, and RFC1035). The default hostname is the word
names cannot begin or end with a hyphen. No other symbols, punctuation
characters, or blank spaces are permitted (as specified in RFC1033,
RFC1034, and RFC1035). The default hostname is the word
switch
followed by the last three octets of the base MAC address. For example, a
switch with a MAC address of 010203040506 has the default hostname
switch040506.
switch with a MAC address of 010203040506 has the default hostname
switch040506.
STEP 3
Click Apply. Your changes are saved to the Running Configuration.
Interface Statistics
Use the Interface page to display statistics for received and transmitted packets.
To display this page, click Status and Statistics > Interface in the navigation
window, or click Port Statistics under Device Status on the Getting Started page.
To display this page, click Status and Statistics > Interface in the navigation
window, or click Port Statistics under Device Status on the Getting Started page.
Select the interface (Port or LAG) for which you want to display statistics, then
select a refresh rate for the statistics. The following information displays for the
selected interface:
select a refresh rate for the statistics. The following information displays for the
selected interface:
•
Total Bytes (Octets)—Total number of octets transmitted or received on the
selected interface since the switch was last refreshed.
selected interface since the switch was last refreshed.
•
Unicast Packets—Total number of unicast packets transmitted or received
on the selected interface since the switch was last refreshed.
on the selected interface since the switch was last refreshed.
•
Multicast Packets—Total number of multicast packets transmitted or
received on the selected interface since the switch was last refreshed.
received on the selected interface since the switch was last refreshed.