Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル

File Management

Cisco Small Business SF200E Series Advanced Smart Switch

66

 

To download a configuration file to the switch to restore a previously backed-up 
file:

Click Administration > File Management > Download/Backup Configuration/
Log in the navigation window.

Select the Transfer Method (HTTP or TFTP).

For the Save Action, select Upgrade to download the file that will be specified 
below.

Enter the following parameters:

•

TFTP Server (TFTP only)—Specify the IPv4 or IPv6 address of the TFTP 
server. Or specify the server name if DNS is enabled in the IP configuration 
(see Domain Name System). 

•

Source File Name—For TFTP, specify the filename, including the path. For 
HTTP, browse to select the file from your computer.

•

Destination File Type—Select one of the following options:

-

Startup Configuration—If the specified configuration file is valid, then it 
will replace the current Startup Configuration file. It will be the active 
configuration file when you reboot.

-

Backup Configuration—The specified file will replace the current 
backup configuration file.

Click Apply to begin the upgrade. A progress bar indicates the status of the 
upgrade.

Ensure that power to the switch remains uninterrupted while the configuration file 
is downloading to the switch. If a power failure occurs while downloading the 
configuration file, the file is lost and the process must be restarted.