Cisco Cisco Packet Data Gateway (PDG) トラブルシューティングガイド
Exec Mode Show Commands (A-C)
show apn counter ip-allocation ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
show apn counter ip-allocation
This command displays the IP allocation method information/statistics counters on per apn basis for all currently active
calls.
calls.
Product
GGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays statistics for all APNs.
Displays statistics for a specific APN.
is the name of the preconfigured APN and can be from 1 to 63 alpha and/or numeric characters
and is case sensitive.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.
Usage
This command is used to display the IP allocation counters on per apn basis for all currently active calls.
Output of this command gives the user clear idea of how many sessions in each apn are using a particular
type of ip-allocation method.
If this command is issued from within the local context, the statistics displayed will be cumulative for all
APNs configured on the system regardless of context. If no APN name is specified and the command is
executed from a context with multiple APNs configured, the output will be cumulative for all APNs in the
context.
Output of this command gives the user clear idea of how many sessions in each apn are using a particular
type of ip-allocation method.
If this command is issued from within the local context, the statistics displayed will be cumulative for all
APNs configured on the system regardless of context. If no APN name is specified and the command is
executed from a context with multiple APNs configured, the output will be cumulative for all APNs in the
context.
Example
The following command displays statistics for all APN on a system:
The following command displays statistics for all APN on a system:
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.