Cisco Cisco Packet Data Interworking Function (PDIF) トラブルシューティングガイド
CSCF Routes Configuration Mode Commands
▀ route
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
: Filters session based on the day of the month.
must be an integer from 1 to
31.
: Filters session based on the day of the week.
must be an integer from 1 to 7
with 1 signifying Sunday and 7 signifying Saturday.
: Filters sessions based on a start time to, optionally, an
end time during the day.
must be integers in either of the following formats:
YYYY:MM:DD:HH:mm or YYYY:MM:DD:mm:ss. YYYY: year range 2005 to 2099 MM: months
(integer range 1 to 12) DD: days (integer range 1 to 31) HH: hours (integer range 0 to 23) mm:
minutes (integer range 0 to 59) ss: seconds (integer range 0 to 59)
(integer range 1 to 12) DD: days (integer range 1 to 31) HH: hours (integer range 0 to 23) mm:
minutes (integer range 0 to 59) ss: seconds (integer range 0 to 59)
: Filters sessions based on the week of the month.
must be an integer
from 1 to 5.
Important:
AoR regular expressions are supported. Refer to the SCM Engineering Rules Appendix in the
Session Control Manager Administration Guide for more information about regular expressions.
Specifies the filter criteria that packets that have passed the base criteria will be compared against. The
following criteria is supported:
following criteria is supported:
: Filters sessions based on a specific access-type used by the subscriber. Possible
access types are:
: 3GPP Access Type
: 3GPP Access Type
: 3GPP Access type
: 3GPP2 Access Type
: 3GPP2 Access Type
: 3GPP2-UMB
: FixedLine Access Type
: FixedLine Access Type
: FixedLine Access Type ADSL2+
: DOCSIS
: Fixed Line Access Type G.SHDSL
: Fixed Line Access Type
: Fixed Line Access Type
: Fixed Line Access Type
: WLAN Access Type
: WLAN Access Type
: WLAN Access Type
: WLAN Access Type
: Wireless MAN Access Type
: Fixed Line Access Type