Cisco Cisco Packet Data Interworking Function (PDIF) トラブルシューティングガイド
GPRS Service Configuration Mode Commands
gmm ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
If the MS sends the requested value of the ready timer in the Attach/RAU Request, and if the requested
value is less than or equal to the value of the negotiate-T3314-timeout timer, then the SGSN sends
Att/RAU Accept with the requested T3314 value.
Att/RAU Accept with the requested T3314 value.
If the MS sends the requested value of the ready timer in the Attach/RAU Request, and if the requested
value is greater than the value of the negotiate-T3314-timeout timer, then the SGSN sends Att/RAU
Accept with the negotiate-T3314-timeout value.
Accept with the negotiate-T3314-timeout value.
Important:
This is the only GMM timer that can be disabled by entering
at the beginning of the command
syntax.
By disabling negotiation of the T3314-timeout value, if the MS
sends the requested value of the ready timer in the Att/RAU Request, then the SGSN sends the T3314-timeout value in
the Att/RAU Accept.
the Att/RAU Accept.
Default: 10080 minutes
Value defines the mm-context lifetime in minutes.
Value defines the mm-context lifetime in minutes.
must be an integer from 1 to 20160.
Default: 12 minutes
Defines the number of minutes for timer to send to MS.
Defines the number of minutes for timer to send to MS.
is an integer from 1 to 186.
Default: 54 minutes
Periodic RAU update timer to send to MS.
Periodic RAU update timer to send to MS.
is an integer from 0 to 186.
Default: 5 seconds
Initial page timeout timer for retransmission for Paging Requests.
Initial page timeout timer for retransmission for Paging Requests.
is an integer from 1 to 186.
Default: 44 seconds
Ready Timer for controlling Cell Update Procedure.
Ready Timer for controlling Cell Update Procedure.
must be an integer from 0 to 500.
Default :6 seconds
Retransmission timer for Attach Accept/RAU Accept/Ptmsi Realloc Command.
Retransmission timer for Attach Accept/RAU Accept/Ptmsi Realloc Command.
must be an integer from 0 to 20.
Default :6 seconds
Retransmission timer for Authentication Request.
Retransmission timer for Authentication Request.
must be an integer from 0 to 20.