Cisco Cisco Packet Data Interworking Function (PDIF) トラブルシューティングガイド
SGSN Operator Policy Configuration Mode Commands
gmm retrieve-equipment-identity ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
: This otional keyword enables the retrieval of software version numbr before the IMEI. If
this option is enabled the equipement identiry retrieval procedure will get IMEISV on secured link
(after Security mode procedure via explicit Gmm Idenitification Request), and if MS is not having
IMEISV(responded with NO Identity), SGSN will try to get IMEI.
(after Security mode procedure via explicit Gmm Idenitification Request), and if MS is not having
IMEISV(responded with NO Identity), SGSN will try to get IMEI.
If no other keyword is provided, imeisv will get IMEISV on secured link (after Security mode procedure via
explicit Gmm Identification Request).
explicit Gmm Identification Request).
Default: disabled
This keyword enables the equipment identity validation and validates the equipment identity against EIR.
This keyword enables the equipment identity validation and validates the equipment identity against EIR.
deny-greylisted: This keyword finetunes the configuration and enables the restriction to the user having
mobile equipement with an IMEI in the EIR‘s grey list.
Usage
Use this command to enable and configure the procedures for mobile equipment identity retrieval and
validation from the EIR identified in the MAP Service configuration mode.
validation from the EIR identified in the MAP Service configuration mode.
Example
The following command enables the SGSN to send ‗check IMEI‘ messages to the EIR:
The following command enables the SGSN to send ‗check IMEI‘ messages to the EIR: