Cisco Cisco Packet Data Interworking Function (PDIF) トラブルシューティングガイド
Subscriber Configuration Mode Commands
▀ ip local-address
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
ip local-address
Configures the local-side IP address of the subscriber's point-to-point connection.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured IP local-address.
Specifies an IP address configured in a destination context on the system through which a packet data
network can be accessed.
network can be accessed.
Usage
This parameter specifies the IP address on the system that the MS uses as the remote-end of the PPP
connection. If no local address is configured, the system uses an "unnumbered" scheme for local-side
addresses.
connection. If no local address is configured, the system uses an "unnumbered" scheme for local-side
addresses.
Example
The following command configures a local address of 192.168.1.23 for the MS:
The following command configures a local address of 192.168.1.23 for the MS: