Cisco Cisco Packet Data Gateway (PDG) トラブルシューティングガイド
Subscriber Configuration Mode Commands
tunnel l2tp ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
is the name of a crypto map that has been configured in the current context.
must be
a string from 1 to 127 alphanumeric characters.
: The pre-shared key for IKE.
must be a string from 1 to 127
alphanumeric characters.
: The pre-shared key for IKE. Encryption must be used when
sending the key.
must be a string from 1 to 127 alphanumeric characters.
Disables tunneling for the current subscriber. When peer-address is included, the tunneling for that specific
L2TP Network Server (LNS) is disabled but tunneling to other configured LNSs is still enabled.
L2TP Network Server (LNS) is disabled but tunneling to other configured LNSs is still enabled.
Usage
Use this command to configure specific L2TP tunneling parameters for the current subscriber.
Example
To specify L2tp tunneling to the LNS peer at the IP address
To specify L2tp tunneling to the LNS peer at the IP address
with a shared secret of
and
preference of , enter the following command: