Cisco Cisco Packet Data Interworking Function (PDIF) トラブルシューティングガイド
AAA Server Group Configuration Mode Commands
radius charging ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Default: 5
Sets the maximum number of re-transmissions for RADIUS authentication requests. This limit is used in
conjunction with the
conjunction with the
parameter for each server.
When failing to communicate with a RADIUS sever, the subscriber is failed once all of the configured
RADIUS servers have been exhausted or once the configured number of maximum transmissions is reached.
For example, if three servers are configured and if the configured max-retries is 3 and max-transmissions is
12, then the primary server is tried four times (once plus three retries), the secondary server is tried four
times, and then a third server is tried four times. If there is a fourth server, it is not tried because the
maximum number of transmissions (12) has been reached.
RADIUS servers have been exhausted or once the configured number of maximum transmissions is reached.
For example, if three servers are configured and if the configured max-retries is 3 and max-transmissions is
12, then the primary server is tried four times (once plus three retries), the secondary server is tried four
times, and then a third server is tried four times. If there is a fourth server, it is not tried because the
maximum number of transmissions (12) has been reached.
must be an integer from 1 through 65535.
Default: Disabled
Specifies the number of seconds to wait for a response from the RADIUS server before re-sending the
messages.
messages.
must be an integer from 1 through 65535.
Default: 3
Usage
Use this command to manage the basic Charging Service RADIUS options according to the RADIUS server
used for the context.
used for the context.
Example