Cisco Cisco Packet Data Interworking Function (PDIF) トラブルシューティングガイド
AAA Server Group Configuration Mode Commands
▀ radius charging accounting server
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
Default: 1813
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
determining which server to send accounting data to.
must be an integer from 1 through 1000,
where 1 is the highest priority.
Default: 1000
Default: 1000
Enables or disables the RADIUS authentication/accounting/charging server functionality and saves the status
setting in the configuration file to re-establish the set status at reboot.
setting in the configuration file to re-establish the set status at reboot.
Specifies that the command must execute without any prompts and confirmation from the user.
Usage
This command is used to configure the RADIUS charging accounting server(s) with which the system is to
communicate for Active Charging Service Prepaid Accounting requests.
communicate for Active Charging Service Prepaid Accounting requests.
Example
Up to 128 AAA servers can be configured per context when the system is functioning as a PDSN and/or HA. Up to 16
servers are supported per context when the system is functioning as a GGSN.
Up to 128 AAA servers can be configured per context when the system is functioning as a PDSN and/or HA. Up to 16
servers are supported per context when the system is functioning as a GGSN.