Cisco Cisco Packet Data Interworking Function (PDIF) トラブルシューティングガイド
EDR Module Configuration Mode Commands
cdr ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Default: 300 seconds
Specifies the EDR/UDR disk space utilization percentage, upon reaching which an automatic push is
triggered and files are transferred to the configured external server.
triggered and files are transferred to the configured external server.
specifies the EDR/UDR disk utilization percentage for triggering push, and must
be an integer from 10 through 80.
Default: 80 percent
Default: 80 percent
Specifies that the system must delete EDR/UDR files after they are transferred to the external file server.
Default: Disabled
Default: Disabled
Specifies the EDR/UDR file transfer mode—how the EDR and UDR files are transferred to an external file
server.
server.
: Specifies that the L-ESS is to pull the CDR files.
: Specifies that the system is to push CDR files to the configured L-ESS.
: Specifies the primary URL location in encrypted
format to which the system pushes the CDR files.
must be the location name in an encrypted format, and must be an alpha and/or
numeric string of 1 through 1024 characters in length.
: Specifies the primary URL location to which the system pushes the CDR files.
must be an alpha and/or numeric string of 1 through 1024 characters in the
―
‖ format.
: Configuration to select LC/SPIO for transfer of CDRs. The system pushes
the EDR files via SPIO in the local context.
: Specifies the secondary URL
location in encrypted format to which the system pushes the CDR files when the primary location is
unreachable or fails.
unreachable or fails.
must be the location name in an encrypted format, and must be an
alpha and/or numeric string of 1 through 1024 characters in length.
: Specifies the secondary URL location to which the system
pushes the CDR files when the primary location is unreachable or fails.
must be an alpha and/or numeric string of 1 through 1024 characters in
format.
Specifies that on ASR 5000 chassis the hard disk on the SMC be used to store EDR/UDR files. On
configuring to use the hard disk for EDR/UDR storage, EDR/UDR files are transferred from RAMFS on the
PSC to the hard disk on the SMC.
Default: Disabled
configuring to use the hard disk for EDR/UDR storage, EDR/UDR files are transferred from RAMFS on the
PSC to the hard disk on the SMC.
Default: Disabled