Cisco Cisco Packet Data Interworking Function (PDIF) トラブルシューティングガイド

ページ / 5213
IPSG RADIUS Server Configuration Mode Commands   
▀  radius accounting 
 
▄  Cisco ASR 5000 Series Command Line Interface Reference 
OL-22947-02   
Dictionary
 
Description
 
starent 
This dictionary consists of all of the attributes in the starent-vsa1 dictionary and incorporates additional Starent 
Networks VSAs by using a two-byte VSA Type field. This dictionary is the master-set of all of the attributes in all 
of the dictionaries supported by the system. 
starent-835 
This dictionary consists of all of the attributes in the starent-vsa1-835 dictionary and incorporates additional Starent 
Networks VSAs by using a two-byte VSA Type field. This dictionary is the master-set of all of the attributes in all 
of the -835 dictionaries supported by the system. 
starent-
vsa1 
This dictionary consists not only of the 3gpp2 dictionary, but also includes Starent Networks vendor-specific 
attributes (VSAs) as well. The VSAs in this dictionary support a one-byte wide VSA Type field in order to support 
certain RADIUS applications. The one-byte limit allows support for only 256 VSAs (0 - 255). This is the default 
dictionary. 
starent-
vsa1-835 
This dictionary consists not only of the 3gpp2-835 dictionary, but also includes Starent Networks vendor-specific 
attributes (VSAs) as well. The VSAs in this dictionary support a one-byte wide VSA Type field in order to support 
certain RADIUS applications. The one-byte limit allows support for only 256 VSAs (0 - 255). This is the default 
dictionary. 
 
 
: Specifies that the shared key between the RADIUS client and this service is encrypted. 
 
: Specifies the shared key between the RADIUS client and this service. 
 must be an alpha and/or numeric string of 1 through 127 characters in length, and is case 
sensitive. 
Enables the ability to create a new session upon receipt of a RADIUS interim message. 
Default: Disabled 
Usage
 
Use this command to configure the communication with the RADIUS client from which RADIUS accounting 
requests are received. 
Example 
The following command configures the service to communicate with a RADIUS client with an IP address of 
 
and an encrypted shared secret of