Cisco Cisco Packet Data Interworking Function (PDIF) トラブルシューティングガイド
Troubleshooting the ASN Gateway Service
Using the System’s Diagnostic Utilities ▀
Cisco ASR 5000 Series Access Service Network Gateway Administration Guide ▄
OL-22953-01
Menu Selection
Description
3) By Callid
Specifies that the monitor is executed for a subscriber with a specific call identification number (callid). When
prompted, enter the specific call identification number to monitor. The callid must be an 8-byte Hexadecimal
number.
prompted, enter the specific call identification number to monitor. The callid must be an 8-byte Hexadecimal
number.
4) By IP
Address
Address
Specifies that the monitor is executed for a subscriber with a specific IPv4 address. When prompted, enter the
specific IPv4 address that you wish to monitor.
specific IPv4 address that you wish to monitor.
5) By IPv6
Address
Address
Specifies that the monitor is executed for a subscriber with a specific IPv6 address. When prompted, enter the
specific IPv6 address that you wish to monitor.
specific IPv6 address that you wish to monitor.
6) Next-Call
Monitor the next call made to the system across all active services.
•
Enter 1 through 5 from the menu to specify the method to use to select the subscriber to monitor.
•
Enter the information for the selected menu item.
If no session matching the specified criteria was being processed when the monitor was invoked, the following output is
displayed:
displayed: