Cisco Cisco Tunnel Terminating Gateway (TTG) トラブルシューティングガイド
Mobile IP Configuration Examples
▀ Example 1: Mobile IP Support Using the System as an HA
▄ Cisco ASR 5000 Series Home Agent Administration
OL-22980-01
Required
Information
Information
Description
IP address pool
name
name
Each IP address pool is identified by a name.
The pool name can be between 1 and 31 alpha and/or numeric characters and is case sensitive.
IP address pools are configured in the destination context(s).
Multiple address pools can be configured within a single context.
The pool name can be between 1 and 31 alpha and/or numeric characters and is case sensitive.
IP address pools are configured in the destination context(s).
Multiple address pools can be configured within a single context.
IP pool
addresses
addresses
An initial address and a subnet, or a starting address and an ending address, are required for each configured
pool.
The pool will then consist of every possible address within the subnet , or all addresses from the starting
address to the ending address.The pool can be configured as public, private, or static.
If this IP pool is being used for Interchassis Session Recovery, it must be a static and srp-activated.
pool.
The pool will then consist of every possible address within the subnet , or all addresses from the starting
address to the ending address.The pool can be configured as public, private, or static.
If this IP pool is being used for Interchassis Session Recovery, it must be a static and srp-activated.
How This Configuration Works
The following figure and the text that follows describe how this configuration with a single source and destination
context would be used by the system to process a Mobile IP data call.
context would be used by the system to process a Mobile IP data call.