Cisco Cisco Packet Data Gateway (PDG) トラブルシューティングガイド
show apn
show apn statistics name ▀
Cisco ASR 5000 Series Statistics and Counters Reference ▄
OL-22990-02
Field
Description
QoS Statistics
Class:
Conversational
Conversational
Specifies the statistics for use traffic of conversational QoS class along with traffic policing/shaping status.
Downlink Negotiate
Limit
Limit
Specifies whether traffic data QoS negotiation limit in downlink direction is enabled or not for this class of
QoS in this APN.
QoS in this APN.
Uplink Negotiate
Limit
Limit
Specifies whether traffic data QoS negotiation limit in uplink direction is enabled or not for this class of
QoS in this APN.
QoS in this APN.
Peak Data Rate(in
bps)
bps)
The peak data rate in bit per seconds for this class of QoS in this APN.
Committed Data
Rate(in bps)
Rate(in bps)
The committed data rate in bit per seconds for this class of QoS in this APN.
Downlink Rate Limit Specifies whether traffic data rate limit in downlink direction is enabled or not for this class of QoS in this
APN.
Uplink Rate Limit
Specifies whether traffic data rate limit in uplink direction is enabled or not for this class of QoS in this
APN.
APN.
Burst Size
This group indicates the static/dynamic burst size in bytes for peak and guaranteed rate limiting for this
class of QoS in this APN.
class of QoS in this APN.
Auto Readjust
Indicates whether auto readjustment of burst size is enabled or not.
Possible states are:
Possible states are:
Enabled
Disabled
Auto Readjust
Duration
Duration
Indicates the configured auto readjust duration in a seconds.
If auto readjust is enabled and no readjust duration is specified the default value is 1 second.
If auto readjust is enabled and no readjust duration is specified the default value is 1 second.
Peak Burst
Size(bytes)
Size(bytes)
Indicates the peak burst size in bytes calculated dynamically by auto readjust duration and rate limit value.
Guaranteed Burst
Size(bytes)
Size(bytes)
Indicates the guaranteed burst size in bytes calculated dynamically by auto readjust duration (seconds) and
rate limit value (bytes).
This counter is applicable only when auto readjustment is enabled.
rate limit value (bytes).
This counter is applicable only when auto readjustment is enabled.
Exceed Action
Specifies the action on downlink/uplink data rate when exceeds the allowed rate limit for this class of
QoS. Possible actions are:
QoS. Possible actions are:
drop: drop the packets.
lower-ip-precedence: transmit the packet after lowering the ip-precedence.
transmit: transmit the packet.