Cisco Cisco Nexus 5010 Switch 技術マニュアル
vpc 106
bdsol-n5548-06
interface Ethernet1/6
switchport mode trunk
switchport trunk allowed vlan 970,3380
spanning-tree port type edge trunk
channel-group 106 mode active
interface port-channel106
switchport mode trunk
switchport trunk allowed vlan 970,3380
vpc 106
QoS Configuration
This configuration keeps a very simple QoS profile, meant as a reference.
In order for Priority Flow Control (PFC) to be enabled, which allows loss-less transmission that is
necessary for FCoE, the QoS configuration needs to match.
necessary for FCoE, the QoS configuration needs to match.
In this case only two classes are used. One for FC/FCoE and one for NFS traffic that allows jumbo
frames.
frames.
bdsol-n5548-05# show running-config ipqos
class-map type qos class-fcoe
class-map type queuing class-fcoe
match qos-group 1
class-map type network-qos class-fcoe
match qos-group 1
policy-map type network-qos jumbo
class type network-qos class-fcoe
pause no-drop
mtu 2158
class type network-qos class-default
mtu 9216
multicast-optimize
system qos
service-policy type network-qos jumbo
service-policy type queuing input fcoe-default-in-policy
service-policy type queuing output fcoe-default-out-policy
service-policy type qos input fcoe-default-in-policy
UCS Manager
.
As mentioned before, in this example a single link will be used only, but this configuration can be
extended to multiple links in a port channel.
extended to multiple links in a port channel.
Port Channel Configuration