Cisco Cisco Aironet 1310 Access Point Bridge インストールガイド
12
78-15954-02
Resetting the Access Point/Bridge to Default
Settings
Settings
You can use the web-browser interface or the CLI to reset the access
point/bridge to a factory default configuration.
point/bridge to a factory default configuration.
Note
The following steps reset all configuration settings to factory
defaults, including passwords, WEP keys, the IP address, and the
SSID.
defaults, including passwords, WEP keys, the IP address, and the
SSID.
Using the Web-Browser Interface
Follow the steps below to delete the current configuration and return all
access point/bridge settings to the factory defaults using the Web-browser
interface.
access point/bridge settings to the factory defaults using the Web-browser
interface.
1.
Open your Internet browser.
2.
Enter the access point/bridge’s IP address in the browser address or
location line and press Enter. An Enter Network Password window
appears.
location line and press Enter. An Enter Network Password window
appears.
3.
Enter your username (default Cisco) in the User Name field.