Cisco Cisco Aironet 350 Access Points
10
Release Notes for Cisco Aironet 340 and 350 Series Access Points and 350 Series Bridges Running VxWorks Firmware Version 12.04
OL-5157-01
Caveats
•
CSCec60688—The access point sometimes drops all client associations and stops communicating
through both the radio and Ethernet ports.
through both the radio and Ethernet ports.
Workaround: Disable DNS on the access point.
Resolved Caveats
The following caveats are resolved in VxWorks firmware version 12.04:
•
CSCea44315—Intermittent AWCO stop/start no longer causes wireless clients to disassociate.
•
CSCea47390—Access point no longer crashes on task 0x97d2d8 “tThttpd.”
•
CSCea51324—Enabling MIC on a 350 series bridge no longer blocks communication.
•
CSCea65900—TFTP downloads no longer cause the access point to crash.
•
CSCeb27772—The access point no longer crashes due to excess memory consumed by maintaining
the association table.
the association table.
•
CSCeb55765—The auto channel-select feature now works as expected.
•
CSCeb58467—A long If-Modified-Since header no longer causes a Buffer overflow in Trivial
HTTP (THTTPd).
HTTP (THTTPd).
•
CSCeb61648—The access point now sends accounting request packets when a client attempts a
double LEAP login.
double LEAP login.
•
CSCeb61728, CSCeb87616, CSCec00332, CSCeb73542—The access point no longer hangs when
too many client devices associate to it.
too many client devices associate to it.
•
CSCeb75140—The access point no longer stops sending beacons unexpectedly.
•
CSCeb76379—When a client that has been assigned to a VLAN disassociates and then reassociates
to the access point, the client no longer has to wait to be reassigned to the correct VLAN.
to the access point, the client no longer has to wait to be reassigned to the correct VLAN.
•
CSCeb82272—Client devices using EAP-SIM can now log off from a connection to an access point
and successfully log back in.
and successfully log back in.
•
CSCeb84020—Bridge links are now stable when the non-root bridge is configured to authenticate
to the root bridge using LEAP authentication.
to the root bridge using LEAP authentication.
•
CSCeb85983—Non-root bridges no longer hang when they lose association with the root bridge.
•
CSCec20567—Non-root bridges now reassociate after losing connectivity to the root bridge.
•
CSCec53509—You can now define client MAC addresses that are not allowed to associate to the
access point.
access point.
•
CSCin46604—The Solicitations Sent counter on the authoritative access point now increments
correctly by 1.
correctly by 1.
•
CSCin46620—Resetting All System Factory Defaults now deletes existing VLAN numbers.
•
CSCin46639—When configured to do so, the access point now switches to repeater mode when
Ethernet link is down.
Ethernet link is down.
•
CSCeb61728—The access point no longer hangs and reboots when an abnormally large number of
clients are associated.
clients are associated.
•
CSCec50480—The non-root bridge no longer loses association with the root bridge when using
LEAP.
LEAP.