Cisco Cisco AP541N Wireless Access Point メンテナンスマニュアル
SNMP
Configuring SNMP on the Access Point
98
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
5
Figure 21 Modifying SNMP Settings
Table 25 SNMP Settings
Field
Description
SNMP
Enabled/Disabled
Enabled/Disabled
You can specify the SNMP administrative mode on your
network. By default SNMP is disabled. To enable SNMP,
click Enabled
network. By default SNMP is disabled. To enable SNMP,
click Enabled
.
To disable SNMP, click Disabled
. After
changing the mode, y
ou must click Apply to save your
configuration changes.
NOTE:
If you disable SNMP, all remaining fields on the
SNMP page are disabled. This is a global SNMP
parameter that applies to SNMPv1, SNMPv2c, and
SNMPv3.
parameter that applies to SNMPv1, SNMPv2c, and
SNMPv3.