Cisco Cisco Packet Data Interworking Function (PDIF)
VLANs
VLAN-Related CLI Commands ▀
ASR 5500 System Administration Guide, StarOS Release 18 ▄
281
CLI Mode
Command
Description
Subscriber
Configuration Mode
Configuration Mode
ip vlan vlan_id
Configures the subscriber VLAN ID that is used with the
assigned address for the subscriber session to receive
packets. If the IP pool from which the address is assigned is
configured with a VLAN ID, this subscriber configured
VLAN ID overrides it.
assigned address for the subscriber session to receive
packets. If the IP pool from which the address is assigned is
configured with a VLAN ID, this subscriber configured
VLAN ID overrides it.
VLAN Configuration
Mode
Mode
bind interface interface_name
context_name
Binds a virtual interface and context to support VLAN
service.
service.
VLAN Configuration
Mode
Mode
[no] ingress-mode
Enables or disables port ingress incoming) mode.
VLAN Configuration
Mode
Mode
priority value
Configures an 802.1p VLAN priority bit for ASN-GW
service only.
service only.
VLAN Configuration
Mode
Mode
[no] shutdown
Enables or disables traffic over the current VLAN.
VLAN Configuration
Mode
Mode
vlan-map interface if_name
context_name
Associates an IP interface having a VLAN ID with a
context.
context.
Table 37. VLAN-Related Monitoring Commands
CLI Mode
Command
Description
Exec Mode show
commands
commands
clear port slot/port vlan vlan_id
Clears NPU statistics for the port that has a previously
configured VLAN ID.
configured VLAN ID.
Exec Mode show
commands
commands
show logical-port utilization table vlan
{ 5-minute | hourly }
{ 5-minute | hourly }
Displays VLAN utilization for a specified collection
interval.
interval.
Exec Mode show
commands
commands
show port info slot/port vlan vlan_id
Displays NPU counters for a previously configured VLAN
ID.
ID.