Cisco Cisco Packet Data Interworking Function (PDIF)
post-processing policy
This command allows you to specify the post-processing policy to be applied on Limit-Reached packets.
Product
GGSN
PDSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-rule-base)#
Syntax Description
post-processing policy { always | not-for-dynamic-discard }
default post-processing policy
default post-processing policy
default
Configures this command with its default setting.
Default: not-for-dynamic-discard
always
Specifies to apply post-processing even if the Credit Control Application (CCA) decides to discard packets
due to limit-reached condition. If there are post-processing priority-based rules, CCA will check for any
redirection rules. Otherwise, by default, CCA will discard the packets. No other post-processing actions like
forward, next-hop, or xheader-insertion will be applied on the limit-reached packets.
due to limit-reached condition. If there are post-processing priority-based rules, CCA will check for any
redirection rules. Otherwise, by default, CCA will discard the packets. No other post-processing actions like
forward, next-hop, or xheader-insertion will be applied on the limit-reached packets.
not-for-dynamic-discard
Specifies to apply post-processing only if CCA decides not to discard packet. Will directly discard the
limit-reached context and will not apply post-processing priority based rules.
limit-reached context and will not apply post-processing priority based rules.
Usage Guidelines
This command allows to enable post-processing priority based rules for content in blacklisted state. Whenever
RADIUS/Diameter prepay server blacklists content the packets are generally discarded. To enable redirection
RADIUS/Diameter prepay server blacklists content the packets are generally discarded. To enable redirection
Command Line Interface Reference, Modes A - B, StarOS Release 19
702
ACS Rulebase Configuration Mode Commands
post-processing policy