Cisco Cisco Tunnel Terminating Gateway (TTG)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
ip ospf network
Configures the OSPF network type.
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > PVC Interface Configuration
configure > context context_name > interface interface_name point-to-point
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-if-pvc)#
Syntax Description
ip ospf network { broadcast | non-broadcast | point-to-multipoint | point-to-point }
no ip ospf network
no ip ospf network
no
Disable this function.
broadcast
Sets the network type to broadcast.
non-broadcast
Sets the network type to non-broadcast multi access (NBMA).
point-to-multipoint
Sets the network type to point-to-multipoint.
point-to-point
Sets the network type to point-to-point.
Usage Guidelines
Use this command to specify the OSPF network type.
Examples
To set the OSPF network type to broadcast, enter the following command;
ip ospf network broadcast
ip ospf network broadcast
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1778
PVC Interface Configuration Mode Commands
ip ospf network