Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (D-S)
▀ logging active
▄ Command Line Interface Reference, StarOS Release 18
4126
Usage
Adjust the active logging levels when excessive log file sizes are being generated or, conversely, not enough
information is being sent to the active log files for adequate troubleshooting support. The
information is being sent to the active log files for adequate troubleshooting support. The
no
keyword is used
to disable internal logging.
Important:
A maximum of 50,000 events may be stored in each log. Enabling more events for logging may
cause the log to be filled in a much shorter time period. This may reduce the effectiveness of the log data as a shorter
time period of event data may make troubleshooting more difficult.
time period of event data may make troubleshooting more difficult.
Important:
Once a log has reached the 50,000 event limit the oldest events will be discarded as new log entries
are created.
Example
The following sets the active logging for events to the maximum.
logging active event-verbosity full
The following command sets the active logging for packet data units to level
3
and sets the output format to
the main-frame style
hex-ascii
.
logging active pdu-data hex-ascii pdu-verbosity 3
The following disables internal logging.
no logging active