Cisco Cisco Packet Data Gateway (PDG)
SaMOG Service Configuration Mode Commands
associate ▀
Command Line Interface Reference, StarOS Release 18 ▄
8413
level { system | user }
: Specifies the processing level of the DHCP server messages.
system
will
enable DHCP server messages to be processed at the system and user-level.
user
will enable DHCP server
messages to be processed at the user-level only. The default value for processing DHCP messages is user
level.
level.
dhcpv6-service dhcpv6_service_name
Specifies the DHCPv6 service to associate with the SaMOG service, to process DHCPv6 packets. Configure
the DHCPv6 server using the
the DHCPv6 server using the
bind address
command in the DHCPv6 Service Configuration Mode.
dhcpv6_service_name
must be an alphanumeric string from 1 through 63 characters.
mrme-service mrme_service_name
The MRME service should be configured before associating the same with SaMOG service.
mrme_service_name
must be an alphanumeric string from 1 through 63 characters.
subscriber-map subscriber_map_name
The subscriber map service should be configured before associating the same with SaMOG service.
subscriber_map_name
must be an alphanumeric string from 1 through 63 characters.
Usage
Use this command to associate the SaMOG service to CGW service, DHCPv4 service, MRME service, or
Subscriber Mapping.
Subscriber Mapping.
Example
The following command associates subscriber-map
smap
with SaMOG Service.
associate subscriber-map smap
The following command associates cgw-service
cgw
with SaMOG Service.
associate cgw-service cgw
The following command associates mrme-service
mrme
with SaMOG Service.
associate mrme-service mrme