Cisco Cisco Packet Data Gateway (PDG)
SLs Service Configuration Mode Commands
bind ▀
Command Line Interface Reference, StarOS Release 18 ▄
8743
Usage
Use this command to bind the SLs service to an IP address.
This command is service critical; removing the configuration will stop the SLs service.
Up to 2 IPv4 or 2 IPv6 addresses can be specified for multi homing purposes.
This command is service critical; removing the configuration will stop the SLs service.
Up to 2 IPv4 or 2 IPv6 addresses can be specified for multi homing purposes.
Example
The following command configures 2 IPv4 addresses for the SCTP connection (for multi-homing), assumes
the default SCTP port of 9082, and associates this connection with an SCTP parameter template named
the default SCTP port of 9082, and associates this connection with an SCTP parameter template named
sctp_sls
:
bind ipv4-address 10.1.1.100 ipv4-address 10.1.1.200 sctp-template
sctp_sls
sctp_sls