Cisco Cisco Packet Data Interworking Function (PDIF)
ATM Port Configuration Mode Commands
▀ toh-sdsf
▄ Command Line Interface Reference, StarOS Release 18
1616
The SD is kept at a value of 100 erroredBits/sec less than the corresponding value of the SF. So if the SD
threshold is configured at 1 error in every 100000 bits/sec, then the SF threshold automatically becomes 1
error in every 1000 bits/sec.
The port will go operationally down as soon as the SD threshold is crossed.
threshold is configured at 1 error in every 100000 bits/sec, then the SF threshold automatically becomes 1
error in every 1000 bits/sec.
The port will go operationally down as soon as the SD threshold is crossed.
Example
Set the SD and SF rates to 1.E-04:
toh-sdsf 1